|
| |
 |
PowerCode™
Wireless Repeater
The MCX-600 wireless repeater extends the communication range of PowerCode™
solutions systems, by relaying data between any PowerCode™ receiver and
remote wireless transmitters. Up to 16 auxiliary repeaters can be
positioned between the farthest group of receivers transmitters and the
receiver. |
For maximum security, the MCX-600 repeater uses a unique, factory
programmed, randomly selected 24-bit digital alarm ID code during each
transmission. This code is selected from 16 million possible code
combinations and is therefore unique and virtually impossible to
accidentally reproduce.
Other important benefits of the MCX-600 include the unique anti-collision
transmission sequence, which ensures accurate reception of simultaneous
signals from multiple transmitters. The fully supervised repeater issues a
test report on an hourly basis, indicating faults such as power failure,
low battery charge and tampering.
Powered by 13-20 VDC or 11-16 VDC power supply, the MCX-600 uses a 9-Volt
nickel cadmium rechargeable battery as a backup in case of power failure.
MCX-600 Features:
- Extends communication range between a
PowerCode™ receiver and any wireless PowerCode transmitter.
- Supports Visonic PowerCode™ wireless
panels and receivers.
- Up to 16 repeaters can be used in a
system.
- PowerCode™ ID factory-selected from 16
million possible combinations.
- Smart anti-collision mechanism supports
multiple simultaneous transmissions.
- Fully supervised.
- Power supply options: 13-20 VDC or 11-16
VDC.
- 9-Volt nickel cadmium rechargeable
backup battery.
- Compact and easily installed.
- Available in several optional
frequencies in compliance with international standards.
|
|
