|
| |
 |
8-Zone
Expander for the MCR-308 Wireless Receiver
The MCX-8 is an 8-zone output expander designed to increase the number of
outputs of the MCR-308 wireless receiver. Up to three MCX-8 expanders,
with eight "open collector" outputs each, can be added to the
MCR-308 via a supervised communication bus. Dry contact outputs can be
provided if needed, using the RL-8 relay module that converts 8 open
collector outputs to dry contact outputs. |
For maximum convenience, the expander modules can be installed either
close to the receiver or at the control panel end, with a distance of up
to 1 kilometer (0.62 mile) between the receiver and the expanders. The
MCR-308 receiver continuously monitors the communication bus, issuing
inactivity alerts in case the connection is interrupted.
The MCX-8's printed circuit board is enclosed in a plastic cabinet for
easy installation and added protection. The base can accommodate one or
two MCX-8 units, or an MCX-8 and an MCR-308 unit. For tamper protection,
an on-board switch is activated when the front cover is removed.
MCX-8 Features:
- Adds 8 outputs to the MCR-308 receiver.
- Up to 3 MCX-8 units can be added to each
MCR-308 unit.
- Can be installed at the control panel
with up to 1 kilometer (0.62 mile) distance from the receiver using a
supervised bus.
- Secure reliable communication with
MCR-308 receiver.
- Compact and easily installed.
|
|
